Size Conversion
Measure first, then use the charts below to find the closest available size.
Our shoe options normally use whole EU sizes unless a product page says otherwise. US and UK half sizes in the chart are conversion references, not additional order options. The size options and measurements on the individual product page always take priority.
Shoe Size Conversion
Foot length is the heel-to-longest-toe measurement, not the outsole or removable insole length.
| US | EU | UK | Inches | CM |
|---|---|---|---|---|
| 5 | 35 | 4 | 8.86″ | 22.5 |
| 5.5 | 36 | 4.5 | 9.06″ | 23.0 |
| 6 | 37 | 5 | 9.25″ | 23.5 |
| 6.5 | 38 | 5.5 | 9.45″ | 24.0 |
| 7 | 39 | 6 | 9.65″ | 24.5 |
| 7.5 | 40 | 6.5 | 9.84″ | 25.0 |
| 8 | 41 | 7 | 10.04″ | 25.5 |
| 8.5 | 42 | 7.5 | 10.24″ | 26.0 |
| 9 | 43 | 8 | 10.43″ | 26.5 |
| US | EU | UK | Inches | CM |
|---|---|---|---|---|
| 7 | 39 | 6 | 9.65″ | 24.5 |
| 7.5 | 40 | 6.5 | 9.84″ | 25.0 |
| 8 | 41 | 7 | 10.04″ | 25.5 |
| 8.5 | 42 | 7.5 | 10.24″ | 26.0 |
| 9 | 43 | 8 | 10.43″ | 26.5 |
| 9.5 | 44 | 8.5 | 10.63″ | 27.0 |
| 10 | 45 | 9 | 10.83″ | 27.5 |
| 10.5 | 46 | 9.5 | 11.02″ | 28.0 |
How to Measure Your Feet
Measure near the end of the day while wearing the type of socks you plan to use with the shoes.
- Stand naturally. Place both feet parallel on a sheet of paper with your weight evenly distributed.
- Mark the length. Mark the back of the heel and the tip of the longest toe, then measure between the two points.
- Measure both feet. Use the larger foot when the two measurements are different.
- Check the girth. Wrap a soft tape around the widest part of the forefoot. If you have wide feet or a high instep, send us both measurements before ordering.
If your measurement falls between two available EU sizes, contact us with the product link, foot length, and foot girth instead of guessing.
Belt Size Conversion
A belt size is normally the distance from the buckle pin to the middle hole—not the total end-to-end belt length.
| Belt size | Middle-hole CM | Middle-hole inches |
|---|---|---|
| 70 | 70 cm | 27.6″ |
| 75 | 75 cm | 29.5″ |
| 80 | 80 cm | 31.5″ |
| 85 | 85 cm | 33.5″ |
| 90 | 90 cm | 35.4″ |
| 95 | 95 cm | 37.4″ |
| 100 | 100 cm | 39.4″ |
| 105 | 105 cm | 41.3″ |
| 110 | 110 cm | 43.3″ |
| 115 | 115 cm | 45.3″ |
| 120 | 120 cm | 47.2″ |
How to measure a belt
- Use a belt that fits you well.
- Lay it flat without stretching it.
- Measure from the buckle pin to the hole you use most often.
- Choose the closest size so your preferred hole sits near the middle of the new belt.
Do not convert directly from a trouser label: rise, fit, and where you wear the belt can change the required measurement.
Not sure which size to choose?
Send us the product link and your measurements before ordering. We will help you compare them with the available options.